Cable Loop care
Cable Loop lasts better when the cable, lock body and number wheels stay free of grit. After flights, gym sessions or a day in the boot, wipe the outside with a soft dry cloth and turn each dial a few times. Keep the mechanism quiet by avoiding force when the numbers are not lined up exactly.

Cable Loop upkeep in transit
Cable Loop often gets used on soft bags, locker zips and awkward anchor points where a rigid lock will not fit. That flexibility also means the cable picks up dust from airport trays, locker interiors and car boots more easily than a plain zip pull. A quick clean after each trip helps the lock body turn properly and keeps the cable coating looking neat.
Check where the loop passes through the bag before every trip. Thin zip pulls, crowded eyelets and bent locker hasps can rub the cable coating if the lock is pulled tight at an angle. On cabin bags and gym bags, leave enough slack for the cable to sit naturally instead of forcing it around sharp corners.
When you change the combination, update your record straight away. Photograph the code card in good light and store it somewhere separate from the bag, especially before an early run to OR Tambo or a domestic hop from Cape Town. Shared bags need one record per person, not a guessed message later.
Routine checks before packing
Look over three parts before you leave: the cable coating, the dials and the release action. The coating should be smooth, the numbers should click into place cleanly, and the lock should open without sticking when the correct code is set. If the lock has been stored near damp towels or used on the coast, dry it fully before packing it away.
If anything feels stiff, stop and compare the steps on our contact form page with the care notes for your lock type before using force. Tell us whether the Cable Loop is going on a suitcase, gym bag, daypack or hostel locker, and mention the city or travel route. That detail matters because coastal air, inland dust and frequent airport handling do not affect locks in the same way.
- Check the code before closing the bag
- Inspect cable coating for cuts or rubbing
- Spin dials gently, never under tension
- See matching care notes in kits and guides
Conditions that affect Cable Loop
South African travel throws different conditions at a small lock. Coastal humidity around Durban and Cape Town can leave moisture on metal parts, while inland dust from Gauteng roads and car parks can settle around the number wheels. Gym use adds chalk, lint and damp fabric, all of which should be cleaned off before storage.
After beach trips, rinse off salt residue with fresh water and dry the lock with the dials facing down so trapped moisture can drain away. After dusty road travel, brush the cable entry points and wipe the body before resetting or storing it. Do not oil the lock heavily, because sticky residue can hold more grit inside the mechanism.
Operated by Astros Marketing (Pty) Ltd from Sunnyrock 1401, with try-ons in Observatory and pickups at Rosebank.
What our Luggage Lock customers say
Verified Google reviews
Tell us about the job
Send sizes, materials and where you are through our contact form, and we will come back with the practical options.
Open the contact form


